<span>Josie lives in an area where there are frequent power cuts. She should use a UPS (Uninterruptible Power Supply). It protects against damage to a computer's hard drive (data) in case of a sudden shutdown.
Hope this helps!</span>
Answer:
II and III only
Explanation:
In Code segment II, the output of the array will be started form arr[0] and ends at the arr[length]. Because loop starts from 0 and ends at length of array. This will print the full array data.
In code segment III, the output will be all values of array as loop starts form first index and ends at last index.
On the other hand I code segment prints all array values except last value of the array. As the loop shows that, it will terminate at second last value of the array.
Answer:
In general the number of bit registers in Intel 80x86 CPU design when combined together forms a 16 - bit register
An example of the -bit registers are AH, AL, BH, BL, CH, CL, DH, and DL
Explanation:
Solution
The 8086 CPU design has a total of eight 8-bit registers and these register can be integrated together to make 16- bit register as well.
The 16-bit data is stored by breaking the data into a low-order byte and high order byte.
The name of the 8 bit registers is shown below:
AH, AL, BH, BL, CH, CL, DH, and DL
