Answer: A. Multicast
Explanation:
Here we are given a situation where it is necessary for the device to stream media to all the PCs connected across the LAN. But as the they are unable to stream the media then it is a problem in the multicast TCP/Ip technology.
Multicasting enables to transfer information or messages from one to many or many to many. Here as a single device is responsible for streaming the content to other PCs across the LAN, therefore it is necessary that multicast has been properly implemented.
Option B is incorrect as it is not a scenario of broadcast as in broadcasting all the receivers must get the streaming however here if a PC does not want to receive the media stream it cannot receive for which multicasting is required.
Option C is incorrect as here we are not talking of one to one communication.
Option D is incorrect as here we cannot have more than one route to send the media content except the LAN.
Answer:
operating system
Explanation:
System software are those programs that many refer to as computer programs. The most basic function of system software is to manage the computer systems. It acts as an interface between the computer’s hardware and the end user. System software converts instructions that end users give to the computer into a machine understandable language. Examples of system software include operating systems, utility programs, device drivers, and windows systems. The operating system is responsible for the functioning of all the computer’s hardware parts. It is the software loaded into the system when the computer boots up. It manages everything, from the memory, to the CPU, and many other different tasks.
Hahahahaha I wanna was the day I wanna was the last time I got to
Answer:
The code to this question can be given as:
code:
tp = ip;
ip = jp;
jp = tp;
Explanation:
In this question, it is defined that write code for swapping values that swap the pointers, not the values they point to. So in this code, we assume that all the variable and its value is defined. we simply use the swapping rule that is the first value holds in the new variable and second value hold on the first variable and in the last second variable holds the value of the new variable. In this code, the value will be interchanged or swapped.
In a parallel connection, the voltage is same in every branch.
Now, three <span>three resistors connected in parallel.
R1 = 2k ohm
</span>R2 = 6k ohm
R3 = 10k ohm
in parallel, net resisitance =
Now, putting the values, we get, R net = 1.30 k ohm.
Ans, voltage = 100 VDC
Thus, power =
= 7.69 Watt
