Bridge communication is the best solution to continue two different building for the same company.
<u>Explanation:</u>
Bridge communication to be placed in both building.master device should be placed in one building where should be connected to a high-end server and the slave device should be placed in another device.
Both the master device and salve should have a subsequent TCPIP address. For example, if the master TCPIP address is 192.168.1.51 and the salve Tcpip address should be 192.168.1.52.
Very easy configure and communication is established. Both devices should be connected with nonstop current interruption. Once communication established speed depends on device capacity.
Answer:
Recommended is frame relay architecture with a local loop at each factory supporting the frame relay service connection to the network provider's POP
Explanation:
Frame Relay can be seen as WAN protocol that is said to often operate at both the physical and data layers link of the OSI reference model due to it high-performance and due to the fact that FRAME RELAY are as well use across Integrated Services Digital Network (ISDN) interfaces in which they are designed for cost-efficient data transmission in order to enable effective intermittent traffic between local area networks (LANs) and endpoints in wide area networks (WANs) which is why frame contains all the information necessary to route it to the correct destination.
Therefore type of BN and WAN architecture and WAN service i would recommend based on the above information is FRAME RELAY ARCHITECTURE with a local loop at each factory supporting the frame relay service connection to the network provider's POP.
