Answer:
1.ClassName and . operator
2. ClassName and [] operator
Explanation:
There are two ways to get the members of a class first one is by using dot(.) operator.
Example : with assumption that person is a class object and age is the member in it we can use it as:
person.age
Second way is to use [] operator with member as a string in it which is used by the compiler as key to get its value.
Example : person["age"]
Answer:
Advantages of both circuit switched networks and TDM are given below:
Explanation:
Advantages of circuit switched network over packet switched network:
- Circuit switched network has the advantage of being physically connected and having a dedicated channel for communication between the sender and the receiver which also makes it more reliable. Packet switched networks do not have a dedicated channel hence, they are not that reliable.
- Circuit switched networks are used for voice calls because there is no timing jitter or delay in these types of networks while packet switched networks do not offer this advantage.
Advantages of TDM over FDM in a circuit switched network:
- TDM is time division multiplexing i.e. multiple information is sent in different time intervals but on the same frequency. While FDM sends information using different frequencies. So, the advantage of using TDM is that the information will be sent from the sender to the receiver using only a single frequency.
- Using TDM, bandwidth is saved because it only sends information on a single frequency unlike FDM.
- In TDM, there is low chance of interference between signals since they are sent in different time intervals from the sender to the receiver. While FDM has a higher chance of interference.
A design be altered so that additional copies of print statements would not be needed by changing the format spring.
<h3>What is the aim of a print statement?</h3>
The PRINT statement is known to be often sent data so that it is taken to the display terminal or to another kind of print unit.
Note that A design be altered so that additional copies of print statements would not be needed by changing the format spring.
Learn more about design from
brainly.com/question/1020696
#SPJ1
When resizing an image or an object in a presentation, a user should not utilize the sizing handles in the middle of the sides or the bottom of the image. There's nothing wrong with resizing this way.
There's nothing wrong with resizing this way
<u>Explanation:</u>
When the sizing handles in the middle of the sides are used, the image stretches out reflecting an increase in the width maintaining There's nothing wrong with resizing this way.
On the other hand, while using the sizing handles at the bottom, the image increases in height whilst maintaining the same width again disturbing the aspect ratio.
<span>I presume the 2 at the end of the formula is a typo (as the 2 and half will cancel each other out if it means to multiply by 2)
pseudocode excludes it: float s0 = 12.0
float v0 = 3.5
float a = 9.8
float t = 10
s = s0 + v0 * t + (a * t) / 2 Output(s) </span>