Answer:
C
Explanation:
When an Ethernet NIC has been configured by the OS to use half-duplex, the transmit pair of the cable uses SIMPLEX transmissions, the receive pair in the SIMPLEX transmissions, and the twisted pair cable uses HALF-DUPLEX transmissions.
Cheers
Answer:
Check your DNS settings
Explanation:
Different errors may occur when setting up your computer to connect to the internet, one of which is described in the question above.
The DNS (Domain Name System) is responsible for redirecting domain names to their physical IP address. Instead of remembering every IP address of sites you visit frequently, domain names are used for easy remembrance, the DNS makes the matching of domain names to IP addresses possible.
To change your DNS setting follow these steps:
- Click settings from your start menu
- Click on Network and Internet
- Look to the bottom of the main page and click on "Network and Sharing Center"
- On the left tab, click "Change adapter settings"
- Right Click on the current network you are using and select properties
- Left-click on the "Internet Protocol Version 4 (TCP/IPv4) and click on properties.
- Check to see if "Obtain DNS server address automatically" is selected, if it is selected,
- Click on the radio button under it "Use the following DNS server address"
- Enter the DNS address you want to use
- Click Ok and close the window.
The problem should be resolved.
Shut down your computer and try again.
I don't believe that there are rules.
Hope I helped,
Ms. Weasley
