Answer:
The answer to this question is given below in the explanation section
Explanation:
This question is about matching the column. So, Gino used the various preinstalled application software and system tools for the following purposes.
Disk cleaner: Gino needs to locate unnecessary files that are taking up a considerable amount of space.
Data recovery: Gino notices many corrupted files and wants to extract good data from them.
Utility diagnostic program: Gino needs to check the operational status of the computer's hardware and software.
Antivirus: Gino's system is acting odd after browsing the internet, and he needs to scan the system.
Am not sure about no.2 and no.4
But am going to answer
1.true
3.true
5.true
Answer:
Explanation:
The following tasks are needed to complete the installation of the sound card so that it is fully usable.
a. and b. : First, you need to slot the sound card into a pci-e slot in the motherboard and connect the optical cable to the back of the sound card. You can look at the back of the card or the box to see if it has an optical audio connector slot.
c. Next you can boot into the Bios to disable the onboard sound card. Each motherboard is different but the usual way of entering the bios is pressing F12 when turning on the PC. Then navigate to the motherboard options tab/menu and turn off the onboard sound.
d. Finally, turn on the PC, log in and at the bottom left search bar type in Device Manager. Next navigate to sound, video and game controllers and make sure the new sound card is being detected.
Answer:
<em>This program is written in python programming language.</em>
<em>The program is self explanatory; hence, no comments was used; However, see explanation section for line by line explanation.</em>
<em>Program starts here</em>
length = float(input("Length of small cube: "))
volume = 27 * length**3
print("Volume: "+(str(volume)))
Explanation:
The first line of the program prompts the user for the length of the small cube;
length = float(input("Length of small cube: "))
The volume of the 27 identical cubes is calculated on the next line;
volume = 27 * length**3
Lastly, the calculated volume of the 27 cubes is printed
print("Volume: "+(str(volume)))
Answer:
It would be the third one
Explanation:
Sence the cable is longer it dims down some of the connection.