Answer: (C) Sensitivity analysis
Explanation:
The sensitivity analysis is also known as simulation analysis or "What-if" analysis as, it is basically used for the outcome prediction of the decision making in various range of the given variable.
It is used by making a given arrangement of factors, an investigator can decide that how changing in a single variable influence the final result.
The sensitivity analysis is the process for investigation of how the vulnerability in the yield of a scientific model or framework can be isolated in the system.
Theretofore, Option (C) is correct as all the other options does not involve in the study of variable and also others are not the extension of what-if analysis.
Answer:
Page Setup Grouping.
Explanation:
In Microsoft Word, Columns break up the page into, at max, 13 columns, and at minumum, 2. The way you go about doing this is
- Go to the Layout Tab
- Go to the Page setup Grouping
- Click on the Columns Action
- In the Dialog Box, choose either from one of the presents, or custom make your own column settings.
- Click Okay
- Done!
Answer:
Bike Frame Flow Time
The value-added percentage of the flow time for this bike frame is:
= 46.
Explanation:
a) Data and Calculations:
Bike Frame Flow Time:
Setup time = 7 hours
Processing time = 6 hours
Storage time = 7 hours
Flow time of the bike frame = 13 hours (7 + 6)
Value-added percentage of the flow time for this bike frame = 6/13 * 100
= 46%
b) Flow time represents the amount of time a bicycle frame spends in the manufacturing process from setup to end. It is called the total processing time. Unless there is one path through the process, the flow time equals the length of the longest process path. The storage time is not included in the flow time since it is not a manufacturing process.
Answer:
a) Yes
b) Yes
c) Yes
d) No
e) Yes
f) No
Explanation:
a) All single-bit errors are caught by Cyclic Redundancy Check (CRC) and it produces 100 % of error detection.
b) All double-bit errors for any reasonably long message are caught by Cyclic Redundancy Check (CRC) during the transmission of 1024 bit. It also produces 100 % of error detection.
c) 5 isolated bit errors are not caught by Cyclic Redundancy Check (CRC) during the transmission of 1024 bit since CRC may not be able to catch all even numbers of isolated bit errors so it is not even.
It produces nearly 100 % of error detection.
d) All even numbers of isolated bit errors may not be caught by Cyclic Redundancy Check (CRC) during the transmission of 1024 bit. It also produces 100 % of error detection.
e) All burst errors with burst lengths less than or equal to 32 are caught by Cyclic Redundancy Check (CRC) during the transmission of 1024 bit. It also produces 100 % of error detection.
f) A burst error with burst length greater than 32 may not be caught by Cyclic Redundancy Check (CRC) during the transmission of 1024 bit.
Cyclic Redundancy Check (CRC) does not detect the length of error burst which is greater than or equal to r bits.
The correct answer to this question is letter "C. type of service provider."
Here are the following choices:
<span>A. subject matter of the message.
B. type of software being used.
C. type of service provider.
D. location of the destination</span>