Answer:
1. E
2. C
3. F
4. D
5. A
6. B
Explanation:
CPU: this is known as the central processing unit and it is considered to be the brain of a computer system. It is the system unit where all of the processing and logical control of a computer system takes place.
A. Decode unit: decodes instructions and data and transmits the data to other areas in an understandable format.
B. Register unit: contains many separate, smaller storage units. Modern CPUs need only a few nanoseconds to execute an instruction when all operands are in its registers.
C. Bus unit: it is used to connect all the other major components together, accepts data, and sends data through the input and output bus sections.
D. Control unit: control of the overall operations of the CPU. The component of the central processing unit (CPU) that controls the overall operation of a computer is the control unit. It comprises of circuitry that makes use of electrical signals to direct the operations of all parts of the computer system. Also, it instructs the input and output device (I/O devices) and the arithmetic logic unit how to respond to informations sent to the processor.
E. Arithmetic logic unit (ALU): performs mathematical functions on data stored in the register area.
F. Cache: small temporary memory area that separates and stores income data and instructions.
Answer:
Advantages of both circuit switched networks and TDM are given below:
Explanation:
Advantages of circuit switched network over packet switched network:
- Circuit switched network has the advantage of being physically connected and having a dedicated channel for communication between the sender and the receiver which also makes it more reliable. Packet switched networks do not have a dedicated channel hence, they are not that reliable.
- Circuit switched networks are used for voice calls because there is no timing jitter or delay in these types of networks while packet switched networks do not offer this advantage.
Advantages of TDM over FDM in a circuit switched network:
- TDM is time division multiplexing i.e. multiple information is sent in different time intervals but on the same frequency. While FDM sends information using different frequencies. So, the advantage of using TDM is that the information will be sent from the sender to the receiver using only a single frequency.
- Using TDM, bandwidth is saved because it only sends information on a single frequency unlike FDM.
- In TDM, there is low chance of interference between signals since they are sent in different time intervals from the sender to the receiver. While FDM has a higher chance of interference.
I believe a metal detector would be a fine choice for an employee entrance.
Answer:
Use the insert column command by placing your cursor between A and B. Then insert your data
Explanation: