Answer:
1790 μrad.
Explanation:
Young's modulus, E is given as 10000 ksi,
μ is given as 0.33,
Inside diameter, d = 54 in,
Thickness, t = 1 in,
Pressure, p = 794 psi = 0.794 ksi
To determine shear strain, longitudinal strain and circumferential strain will be evaluated,
Longitudinal strain, eL = (pd/4tE)(1 - 2μ)
eL = (0.794 x 54)(1 - 0.66)/(4 x 1 x 10000)
eL = 3.64 x 10-⁴ radians
Circumferential strain , eH = (pd/4tE)(2-μ)
eH = (0.794 x 54)(2 - 0.33)/(4 x 1 x 10000)
eH = 1.79 x 10-³ radians
The maximum shear strain is 1790 μrad.
Answer:
The frequency that the sampling system will generate in its output is 70 Hz
Explanation:
Given;
F = 190 Hz
Fs = 120 Hz
Output Frequency = F - nFs
When n = 1
Output Frequency = 190 - 120 = 70 Hz
Therefore, if a system samples a sinusoid of frequency 190 Hz at a rate of 120 Hz and writes the sampled signal to its output without further modification, the frequency that the sampling system will generate in its output is 70 Hz
Answer:
Sealing agent
Explanation:
Generally, when we have water leaks in almost any building or equipment, we use a sealant. However, this sealant could be of different types depending on the peculiarity of the leakage.
Thus, the correct answer is sealing agent.
Answer:
hello im new trying to get points
Explanation:
Answer:
Explained
Explanation:
Cold working: It is plastic deformation of material at temperature below recrystallization temperature. whereas hot working is deforming material above the recrystallization temperature.
Given melting point temp of lead is 327° C and lead recrystallizes at about
0.3 to 0.5 times melting temperature which will be higher that 20°C. Hence we can conclude that at 20°C lead will under go cold working only.
