Turn the revolving turret (2) so that the lowest power objective lens (eg. 4x) is clicked into position.
Place the microscope slide on the stage (6) and fasten it with the stage clips.
Look at the objective lens (3) and the stage from the side and turn the focus knob (4) so the stage moves upward. Move it up as far as it will go without letting the objective touch the coverslip.
Look through the eyepiece (1) and move the focus knob until the image comes into focus.
Adjust the condenser (7) and light intensity for the greatest amount of light.
Move the microscope slide around until the sample is in the centre of the field of view (what you see).
Use the focus knob (4) to place the sample into focus and readjust the condenser (7) and light intensity for the clearest image (with low power objectives you might need to reduce the light intensity or shut the condenser).
When you have a clear image of your sample with the lowest power objective, you can change to the next objective lenses. You might need to readjust the sample into focus and/or readjust the condenser and light intensity. If you cannot focus on your specimen, repeat steps 3 through 5 with the higher power objective lens in place. Do not let the objective lens touch the slide!
When finished, lower the stage, click the low power lens into position and remove the slide.
Your microscope slide should be prepared with a coverslip over the sample to protect the objective lenses if they touch the slide.
Do not touch the glass part of the lenses with your fingers. Use only special lens paper to clean the lenses.
Always keep your microscope covered when not in use.
Always carry a microscope with both hands. Grasp the arm with one hand and place the other hand under the base for support.
Answer: 4 haploid (1 chromosome) cells at the end of meiosis. The original cell no longer exists.
Explanation: meiosis I produces 2 haploid cells, meiosis Ii duplicates those cells. The cell becomes 4 cells, each with 1 chromosome
Answer - It is a Great Concern because microbes such as a hydra can consume some of that mercury which then a shrimp can consume that microbes which then transfer into the mouth of a trout which then when humans fish they consume the fish which later we get Mercury poisoning.
Reasoning - There are more concern but these are a few and some reasoning.
Hello!
Scientists can calculate the distance from the seismograph station to the focus using the difference in arrival times of P and S waves.
Have a great day!
Cyanobacteria were very simple organisms and performed were an role in changing Earth's early atmosphere. They carried out photosynthesis to produce the materials they needed to grow. In this process, they release Oxygen which is needed to sustain life on Earth for Humans and other organisms.