Answer:You will have to turn the lug nuts counter clockwise to loosen them. Do not remove the lug nuts all the way off the threaded shaft. Next, to get the wheel off the car, you have to raise the corner of the car where the flat is located.
Changing a Flat Tire The following steps are the safest way to change a flat tire. If you received a flat tire while driving down the road; first thing to do is to get away from oncoming traffic; at that time, find a place that is well lit, such as a parking lot. Keep in mind the farther you drive on a flat tire, the more damage you will incur to the tire and wheel. Secondly, set the parking brake so that the car does not roll away while the car is off the ground. Then, you have to locate your spare tire, which will replace the flat tire; that is usually in a compartment inside the trunk. The spare tire is secured in place by a bolt or a bracket that unscrews easily. In addition to the spare tire, you will need a jack to raise Therefore, you will raise the jack so that it almost touches the car. Once the jack is raised enough to just touch the car; position the jack so that it is not tilted; furthermore, make sure the jack is 6 – 12 inches behind the front or rear of the tire. When you are sure the jack is in position correctly; proceed by raising the jack, so that the car will rise off the ground. Remember you need to fit a fully inflated tire in place of the flat; therefore, make sure you jack the car up enough to get a fully inflated tire under there. Once you have the car off the ground; go ahead and remove the lug nuts with your hand. Now, grasp the wheel at 3 o’clock and 9 o’clock and pull the wheel straight off. Place the flat tire in the trunk; otherwise, it will be in the way while you are working. You will then, pick up the spare tire and line up the holes with the threaded shafts; then slide the spare tire onto the threaded shafts. Next, you will spin the lug nuts on by hand; indeed, you have to turn the lug nuts clockwise to tighten them.
Explanation:
Answer:
because they're basically like the 1st and 2nd steps of the writing process, and they help you to write a better paper/make a better project
Explanation:
when you brainstorm, you come up with ideas. once you choose the idea or ideas you like the most, you can write your first draft completely about that idea or ideas. if you go into a first draft without brainstorming, you might end up with too many ideas, a disorganized paper, and just bad quality all around.
A. Gerund Phrase (sorry if this is too late)
<span>false cause
When a speaker or writer tries to connect two things that don't directly have an effect on each other as having an effect on each other, it is false cause. Saying that one thing directly causes another when there is no proof or factual evidence to back that up weakens an argument significantly. </span>
