Answer: w would equal -20
No. the first 3 is 300, the second 3 is 30, and the third 3 is 3
Here you have to find which each variable is, for this you start of picking one equation,
x + 2y + 6z = 4
-3x + 2y - 2 = -4
4x + 2z = 16
depending the equation you pick you multiply that by a certain number that will give you the opposite of one of the other equations,
-1(x + 2y + 6z = 4)
= -x -2y - 6z = -4
With this you add or subtract it with the equation that has the same number or variable, or both,
In this case it will be the equation,
-3x + 2y + 6z = 4
You can use this one or the third equation since both have a positive 2y which will cancel with -2y from the new equation,
-x - 2y - 6z = -4
-3x + 2y -z = -4
= -4x -7z = -8
Now you since you just eliminated the variable (y) you now have 2 variables, and the last equation has only 2 variables, meaning now you find the answer to those to equations,
-4x -7z = -8
4x + 2z = 16
= -5z = 8
Now leave the variable by itself,
z = 8/5
Now you found the variable (z), with this just substitute on one of the equations we used to find (z) so you can find (x), after that substitute those answered to on of the original equations so you can find (y)
Answer:
No, the absolute value of a number is different from the opposite.
Step-by-step explanation:
For example, the absolute value of 4 is 4.
l4l = 4
But the opposite of 4 is -4.
Absolute value is ALWAYS positive, but the opposite of a positive number is a negative number.
The goal is to get the volume as large as possible while the surface area is made as small as possible. Why? Because the volume is the amount of stuff you can hold and the surface area is the amount of material to make the container.
Consider an example of making a cup. The inside portion is the amount the cup can hold. The more liquid, the better. The cup makers want to use as little material as possible so that they reduce costs. If the cup makers produce a cup that has volume of 10 cubic inches and uses 10 square inches of material, then the surface area to volume ratio is 10:10 which reduces to 1:1. A more efficient cup is made if that same volume (10 cubic inches) can be made for less material say 5 square inches to make the ratio now 5:10 which reduces to 1:2.
So in summary, reducing the surface area to volume ratio will make more sense economically as the company makes more money while reducing costs (therefore increasing overall profit)
