11 is the answer for this question
<span>The answer is D. Electric resistance increases with an increase in the length of a wire and as a result current flow decreases. There is a direct relationship between the length of the wire and the resistance. The longer the wire, the more resistance there will be. Additionally, from Ohm's Law, current is inversely proportional to resistance. This means as the current increases, resistance decreases or vice versa.</span>
You have to do 400.Pa×55m2
the answer is 22000
Assuming you are looking for the acceleration a:
1.
2.
where T is the tension and a is the acceleration of the blocks. The acceleration of the two blocks and the acceleration of the pulley must be equal.
The torque on the pulley is given by:
3.
where
and
.
Combining the three equations:
Answer:
the number density of the protons in the beam is 3.2 × 10¹³ m⁻³
Explanation:
Given that;
diameter D = 2.0 mm
current I = 1.0 mA
K.E of each proton is 20 MeV
the number density of the protons in the beam = ?
Now, we make use of the relation between current and drift velocity
I = MeAv ⇒ 1 / eAv
The kinetic energy of protons is given by;
K = v²
v = √( 2K / )
lets relate the cross-sectional area A of the beam to its diameter D;
A = πD²
now, we substitute for v and A
n = I / πeD² ×√( 2K / )
n = 4I/π eD² × √( / 2K )
so we plug in our values;
n = ((4×1.0 mA)/(π(1.602×10⁻¹⁹C)(2mm)²) × √(1.673×10⁻²⁷kg / 2×( 20 MeV)(1.602×10⁻¹⁹ J/ev )
n = 1.98695 × 10¹⁸ × 1.6157967 × 10⁻⁵
n = 3.2 × 10¹³ m⁻³
Therefore, the number density of the protons in the beam is 3.2 × 10¹³ m⁻³