Answer:
SPARC
.
Explanation:
When the user has understood they're required to install the linux distribution to set up a specific program works better on such a RISC architecture. SPARC must therefore find the device from which it would work that following distribution for the Linux. It is a RISC and ISA that was previously designed through both Fujitsu and Sun.
Answer:
in what context is it in? it could be aim high for goals set limits that are hard to reach but not impossible
Explanation:
Depends on your budget and usage.
If no/low budget and happy with speed of current computer - replace network card or get an USB network card to resolve no wifi signal issue.
If no problem with budget - get a brand new latest computer.
Remember, it’s your data in the computer that worth a lot,computer hardware doesn’t cost that much and can be easily replaced.
The answer is 1.7 billion
Answer:
Since there is no server in a peer-to-peer network, both computers will share resources through the network component used in linking them together such as a cable or a switch.
Explanation:
In its simplest form, a peer-to-peer (P2P) network is created when two or more computers (in this case computer A and C) are connected and share resources without going through a separate server computer. A P2P network can be an ad hoc connection—a couple of computers connected via a Universal Serial Bus to transfer files or through an Ethernet cable. A P2P network also can be a permanent infrastructure that links a half-dozen computers in a small office over copper wires using switches as a central connector. Or a P2P network can be a network on a much grander scale in which special protocols and applications set up direct relationships among users over the Internet.
Please find attached the diagram of the peer-to-peer network of the two computers, computer A and computer. We have two network connections in the diagram.
The first one was implemented using a crossover Ethernet cable to connect both computers through the RJ45 LAN port on their network interface card.
In this network configuration, that will go through the NIC card from Computer C, through the cable to the NIC on computer A and vice versa.
In the second implementation, we used a switch to connect both computers using a straight Ethernet cable.
In this connection, data will go through the NIC card in computer C, through the cable connecting Computer C to the switch, through the switch, then through the cable connecting the switch to computer A and finally through the NIC card on computer A and vice versa