No, you would see arrows pointing in opposite directions <--> like so
Answer:
It is A: Packet metadata is used to route and reassemble information travelling through the internet.
Explanation:
Step 1: The Internet works by chopping data into chunks called packets. Each packet then moves through the network in a series of hops. Each packet hops to a local Internet service provider (ISP), a company that offers access to the network -- usually for a fee
Step 2: Entering the network
Each packet hops to a local Internet service provider (ISP), a company that offers access to the network -- usually for a fee.
Step 3: Taking flight
The next hop delivers the packet to a long-haul provider, one of the airlines of cyberspace that quickly carrying data across the world.
Step 4: BGP
These providers use the Border Gateway Protocol to find a route across the many individual networks that together form the Internet.
Step 5: Finding a route
This journey often takes several more hops, which are plotted out one by one as the data packet moves across the Internet.
Step 6: Bad information
For the system to work properly, the BGP information shared among routers cannot contain lies or errors that might cause a packet to go off track – or get lost altogether.
Last step: Arrival
The final hop takes a packet to the recipient, which reassembles all of the packets into a coherent message. A separate message goes back through the network confirming successful delivery.
Answer:
Ping the other workstations from the IT Admin workstation to confirm that connection has been lost, check the status of the network interface card in the workstation with command ifconfig in the terminal, then reset the connection using ifdown and ifup commands. If the problem is not resolved, check the cable connection.
Explanation:
Ping is an ICMP echo message sent by a network host to another to check for connectivity. If they are connected, the other workstation responds with an ICMP response message.
The ifconfig in Linux systems displays the network adapters and their individual IP configurations. If there is no connection even after the network is reset, then the cable connectors could be the problem.
Answer:
Creates items using page layout skills
The amount paid regularly for insurance is called the premium.
