Answer:
Step-by-step explanation:
The diameter is 0.45 in
The percent error is < 4%
<u>The lower limit of allowance is:</u>
- 0.45 - 4% =
- 0.45*(1 - 0.04) =
- 0.45*0.96 =
- 0.432
Less than 4% error means the diameter should be greater than 0.432 in.
The bolt with the diameter 0.43 in is outside of the allowance and should <u>not</u> go into the package
Answer:
please add more to the question, this is unanswerable
Step-by-step explanation:
Clockwise is the way all clocks must go which is to the right and counter clockwise is to the left
Answer:
18in^2
Step-by-step explanation:
You can round the 3.4 to a 3 and the 5.9 to a 6.
3×6=18