<span> (4.08)(0.7) = 2.856
--------------------------------</span>
Answer:
A company produces electric insulators. The strength of the insulators is important since a broken insulator may cause a short circuit. Unfortunately, the strength varies significantly due to the material. Because of the expense, only a limited number of insulators could be tested. The engineers sampled 25 insulators (From a production run of 200), and conducted a destructive test to determine the force that was required to break the insulators. The mean value of this force was 1723 lbf with a sample standard deviation of 90 lbf. You may approximate the population standard deviation with the sample standard deviation for the following questions. a. Determine if the population is large enough or if a finite population correction (FPC) factor is needed. If so, what is the FPC factor? b. For 95% confidence, determine the margin of error (+ lbf) c. For these conditions, estimate the range of the probable population mean. Provide lower and upper values. For 95% confidence, determine the margin of error ( Assume the same mean and sample standard deviation. What is one advantage and one disadvantage of using 50 insulators instead of 25 insulators? d. lbf) if 50 insulators were tested.
Step-by-step explanation:
Answer:32
Step-by-step explanation: manage by hours of work and pay you’ll come to 32
Answer:
The quantity of water drain after x min is 50 
Step-by-step explanation:
Given as :
Total capacity of rain barrel = 50 gallon
The rate of drain = 10 gallon per minutes
Let The quantity of water drain after x min = y
Now, according to question
The quantity of water drain after x min = Initial quantity of water × 
I.e The quantity of water drain after x min = 50 gallon × 
or, The quantity of water drain after x min = 50 gallon ×
Hence the quantity of water drain after x min is 50 Answer
Answer:
y+3= -6(x+9) is the answer
Step-by-step explanation:
