Poster because if you have that much space....well what I do is calculate it by the centimeters in square divide:)
Answer:
In Python:
cprice= int(input("Current price: "))
lmonth= int(input("Last month's price: "))
print("This house is $"+str(cprice))
print("The change is $"+str(cprice-lmonth)+" since last month")
print("The current mortage $"+str((cprice * 0.051) / 12)+" since last month")
Explanation:
Get current price
cprice= int(input("Current price: "))
Get last month's price
lmonth= int(input("Last month's price: "))
Print the current price
print("This house is $"+str(cprice))
Print the change
print("The change is $"+str(cprice-lmonth)+" since last month")
Print the mortgage
print("The current mortage $"+str((cprice * 0.051) / 12)+" since last month")
Answer:
FF-FF-FF-FF-FF-FF and 255.255.255.255
Explanation:
FF-FF-FF-FF-FF-FF can be defined as the layer 2 address broadcast which is often used on ethernet frames as well as help to broadcast all equipment due to the fact broadcast is made possible through Ethernet networks in which the Frames are addressed to reach every computer system on a given LAN segment as far as they are addressed to MAC address FF:FF:FF:FF:FF:FF.
255.255. 255.255 can be seen as the layer 3 address which help to address the exact same hosts because it enables the broadcast address of the zero network which is the local network due to the fact that the IP broadcasts are often used by BOOTP and DHCP clients to find and send requests to their respective servers in which a message sent to a broadcast address may be received by all network-attached hosts.
Therefore the Layer 2 and Layer 3 destination addresses which the message contain are FF-FF-FF-FF-FF-FF and 255.255.255.255
Answer:
Explanation:
The following code was written in Java. The code contains the Employee class which contains the two variables (name, salary), the constructor, getter and setter methods for both variables, and an overwritten toString method. It also contains a tester class with the main method inside and creates a Employee object and initializes it. Then it calls the toString method. The output can be seen in the attached image below. Due to technical difficulties I have added the code as a txt file below.
There are three types of traffic in an IP network:
1. Unicast - one-to-one traffic (traffic from one sender to one receiver)
2. Multicast - one to many traffic (one sender and more receivers)
3.Broadcast - every device in the network will receive the packet
So, the broadcast traffic <span>always goes to all devices in a subnet. </span>