Answer: 2 decimal digits
Step-by-step explanation:
When multiplying decimals, placement of the decimal point is very important. Since there is one decimal digit in each factor, there must be two decimal digits in the product. This is because tenths x tenths = hundredths
Hope this helps and good luck! :)
The mean of the numbers is c. 67
Hi there! A = 78
A + 44 = B
We can plug in the values of A and B into the equation. We then get an equation with only one variable (x), which we can solve.
1x + 76 + 44 = - 6x + 134
Collect terms.
1x + 120 = - 6x + 134
Add 6x to both sides.
7x + 120 = 134
Subtract 120 from both sides
7x = 14
Divide both sides by 7
x = 14 / 7 = 2
A = 1x + 76
Now plug in the value of x we just found
A = 2 + 76 = 78
Answer:
The area of the table after it is cut is 12 or 36 because
Step-by-step explanation:
6 times 2= 12 and 6 times 6= 36 so year
Answer:
I will assume that the end of the top section if it were cut at 0 degrees would be cut at right angles to the length of the section.
Joining a top section with a 37 degree end angle to a side piece with a 50 degree end angle will result in the length of the side piece being at an angle of
37 + 50 = 87 degrees to each other.
The same will be true for the other side.
If the sides were parallel, then going up one side, across the top and then down the other side will result in a change of direction of 180 degrees. However, in this frame the direction turns 87 degrees at the first top corner and another 87 degrees at the second top corner. This is a total of
87 + 87 = 174 degrees instead of 180 degrees.
The two sides diverge at an angle of
180 - 174 = 6 degrees from each other as they extend downwards from the top of the frame
Step-by-step explanation:
