Answer:
V = 13312yd^2
Step-by-step explanation:
32 x 32 x 39 / 3 = volume
32 x 32 x 39 = 39936/3 = 13312 sq yard.
As you can see the formula for Volume is L x W x H / 3
The formula for Area of a pyramid is SA = A + (3/2)bh
We have one rule we work out the square to represent the A then we can find SA. While 3/2 is 1.5 really which is 150% of the height x the base, then we + plus the area of the square.
The volume, surface area and the ratios of the SA to volume will be as follows:
Volume=πr²h
Area=2πr²+πdh
Ratio of SA to volume=Area/volume
π=3.14
Thus using the above formula:
1.
a]
Radius: 3 inches
Height: 2 inches
Volume=πr²h
volume=π×3²×2=56.52 in³
b]
Area=2πr²+πdh
2×π×3²+π×2×3×2
=56.55+37.68
=94.23 in²
c]
Ratio=area/volume
=94.23/56.52
=1.6672
1.
Radius: 2 inches
Height: 9 inches
a]
V=πr²h
V=3.14*2^2*9
V=113.04 in³
b]
Area=2πr²+πdh
=2*3.14*2^2+3.14*2*2*9
=25.12+113.04
=138.16 in²
c]
Ratio=area/volume
=138.16/113.04
=11/9
3.
Diameter=4 inches
Height= 9 inches
a]
V=πr²h
V=3.14×2²×9
V=113.04
b]
Area=2πr²+πdh
=2*3.14*2^2+3.14*4*9
=25.12+113.04
=138.16 in²
c]
Ratio=area/volume
=138.16/113.04
=11/9
4]
Diameter: 6 inches
Height: 4 inches
a]
Volume=πr²h
=3.14×3²×4
=113.04 in³
b]
Area=2πr²+πdh
=2×3.14×3²+3.14×6×4
=56.52+75.36
=131.88 in²
c] Ratio
131.88/113.04
=7/6
1. For the surface area to volume to be small it means that the area is smaller than the volume, for surface area to volume be larger it means that the surface area is larger than the volume. It is more economical for the surface area to volume to be small because it will mean that small amount of materials make cans with large volume. This means cost of production is cheaper.
2. To evaluate this process let's use one of the dimensions:
Radius: 3 inches
Height: 2 inches:
i. add radius and height:
3+2=5 inches
ii. Multiply radius and height:
3×2=6
iii. Dividing the result from step 1 by the result in step 2:
5/6
iv. Multiply the result from step 3 by 2:
5/6×6
=5
This result does not seem to add up to the result in our earlier ratio. Thus we conclude that Khianna was wrong. This method can't work with 3-D figures.
Answer:
yea its right here
Step-by-step explanation: sike
To solve, you will need to find the y intercept which in this case is on the graph. The find the slope's between the two points and calculate the average slope by adding the two then dividing. Hope that helps!
The horizontal value in a pair of coordinates: how far along the point is. The X Coordinate is always written first in an ordered pair of coordinates (x,y), such as (12,5). In this example, the value "12" is the X Coordinate. Also called "Abscissa" See: Coordinates.
If this doesn’t answer your question, then do you have any further information?
