Answer:
(c) system.exist(1);
Explanation:
system.exist(1); is used for the termination of the program here both option c and d should be correct but in option d there is exit(0) and zero indicates return means program will return but besides zero if there is any non zero number then program will not return and in option c there is a non zero number which means program will not return so option c system.exist(1); will be the correct option for the termination of program
Answer:
CT = 470nF + 1000nF = 1470nF or 1.47μF
Explanation:
When capacitors are connected together in parallel the total or equivalent capacitance, CT in the circuit is equal to the sum of all the individual capacitors added together. This is because the top plate of capacitor, C1 is connected to the top plate of C2 which is connected to the top plate of C3 and so on. The same is also true of the capacitors bottom plates. Then it is the same as if the three sets of plates were touching each other and equal to one large single plate thereby increasing the effective plate area in m2.
Since capacitance, C is related to plate area ( C = ε(A/d) ) the capacitance value of the combination will also increase. Then the total capacitance value of the capacitors connected together in parallel is actually calculated by adding the plate area together. In other words, the total capacitance is equal to the sum of all the individual capacitance’s in parallel. You may have noticed that the total capacitance of parallel capacitors is found in the same way as the total resistance of series resistors.
The currents flowing through each capacitor and as we saw in the previous tutorial are related to the voltage.
Answer:
Connecting a new computer to the network.
Is there a picture to go along with this? I don’t see one and an willing to help!