The thermosphere has no definite outer limit.. it’s the almost the outermost layer :)
Answer:
Formation of a Precipitate
Unexpected Color Change
Formation of a Gas
Explanation:
Given Information:
Radius = ra = 2.60 cm = 0.026 m
Density = J = 15.0 nC/m
change in potential difference = ΔV = 200 V
Required Information:
Distance = d = ?
Answer:
distance = 0.088 m
Explanation:
As we know
ΔV = Vb - Va = J/4πε₀*ln(rb/ra)
Where ra and rb is the point where potential difference is Va and Vb respectively
1/4πε₀ = 9x10⁹ N.m²/C²
We want to find the distance d = rb - ra
ΔV = J/4πε₀*ln(rb/ra)
200 = 9x10⁹*15x10⁻⁹*ln(rb/ra)
200/135 = ln(rb/ra)
1.48 = ln(rb/ra)
taking e on both sides yields
e^(1.48) = rb/ra
4.39 = rb/ra
rb = 4.39*0.026
rb = 0.114 m
Therefore, the required distance is
d = rb - ra
d = 0.114 - 0.026
d = 0.088 m
Therefore, the other probe must be placed 0.088 m from the surface so that the voltmeter reads 200 V
Answer: <em>In order to calculate the mechanical advantage of a wheel and axel, you can divide the radius of the wheel by the radius of the axle. If a wheel's radius is 60cm and its axle is 30cm, what is the mechanical advantage of the wheel and axle? The output force of the wheel and axle is 2 times greater than the input force.</em>
<em />
<h2>
</h2>
Answer:
3000W
Explanation:
Given parameter:
Weight of safe = 2000N
Height of lift = 6m
Time = 4s
Unknown:
Power used by Rudolph = ?
Solution:
Power is the rate at which work is being done. It is expressed as:
Power = 
Work done = Weight x height = 2000 x 6 = 12000J
Power = 
= 3000W
