Area of rectangle = Length*width
A = 28 so 28 = 4 * height
height = 28/4 = 7
Answer:
95 %
Step-by-step explanation:
95 + 71 + 69 + 84 + 83 / 5 = 80.4
Answer:
The answer would be A. 55.
Step-by-step explanation:
For the 35% you would take your 200 and divide it by 2 and have two 100's. Since 35% is out of 100% you could take 35 from each 100 and add them together to get 70.
For the 3/8 you would divide and get .375 then you would multiply that by 200 which would give you 75 yellow tags. Then you would add 75 and 70 and get 145. Then subtract 145 from 200 to get 55. Therefore there would be 55 red tags.
The first standard deviation covers about 68% of the distribution in a normal curve. (34% higher, 34% lower than the mean). the second standard deviation covers 28% (14% between 1st and 2nd SD above the mean, 14% between 1st and 2nd SD below the mean). In our case
1 Standard deviation = 27 hours (we will approximate to 25 hours)
Mean = 2,000
This means that 34% of the distribution is between 1975 and 2000 hours (within 1 standard deviation below the mean)
2,000- 2,050 covers the range within 50 hours above the mean.
50 hours is roughly 2 standard deviations. The second standard deviation (standard deviation between 1 and 2) covers around 14% on each side of the distribution.
50 hours is roughly 2 standard deviations, which means we add 34% + 14% = 48%.
The range of 1,975 - 2,050 hours covers 34% of the distribution below the mean and 48% of the distribution above the mean.
This means that the probability that the light bulb will last somewhere within this range is 34% + 48% = 82%
The closest answer is 79%. The difference can be explained by the fact that, for simplicity, we approximated the standard deviation to be ~25 hours instead of the real standard deviation of 27 hours.
Answer:
:(
Step-by-step explanation:
figure it out
