An exterior angle is the sum of the two other interior angles
<span>the three interior angles are 55 and 65 and 180-(55+65)=60 </span>
<span>so 60 + 55 = 115 </span>
<span>60 + 65 = 125 </span>
<span>65 + 55 = 120
</span>
brainlest answer.
Answer:
7 Hours 12 Minutes
Step-by-step explanation:
So they one of the printer increases at a rate of 1/12 and the other increases at a rate of 1/18. Since you don't know the time it actually takes, you will replace both numerators with and x. (x/12 and x/18). You want to set these up so that they are adding. (x/12 + x/18=1). Since you're adding, you want to change it to the same denominator. The lowest is 36 so you multiply x/12 by 3/3 (so you don't unbalance the equation) and x/18 by 2/2. You'll end up with 3x/36 + 2x/36= 1 which will simplify to 5x/36=1. Multiply each side by 36 to leave the variable by itself. It becomes 5x=36 and when you divide it by 5 you get 7.2. So it's seven and .2 hours, which is equivalent to7 and 1/5 of an hour or 7 hours and 12 minutes.
<span>The volume of each celluloid die is (.25 x .25 x .25) = 0.015625 cubic inch.
To manufacture 24,000 of them, you need to start with <u>at least</u>
(24,000) x (0.015625) = <u>375 cubic inches</u>.
I don't know how celluloid is sold, so you should also keep in mind that
375 cubic inches = about 207.8 fluid ounces, or about 6.5 quarts.
I'm sure a bit more than that was used in the manufacture, since
there's always some wasted, spilled, or trimmed off of the edges. </span>
The answer would be 8 dogs.
