Answer:
To make a pinhole camera you will need the following materials:
· A box, which will serve as a "camera". It can be any type of box, but you should be careful to close it well so that the light does not enter.
· An aluminum can.
· Scissors or some other cutting tool.
· A pushpin or pin.
· Black insulating tape.
· Photographic paper.
1. The first thing you will have to do is a hole in the box. You can do it with a circular or rectangular shape. In addition, it is advisable to paint or line the inside of your black box so that the light does not strain inside and get better results in your photograph.
2. Cut a piece of aluminum from the can. It will be in that portion of metal where you will make the hole through which the image of your photograph will later enter.
3. With the pin make a hole in the piece of metal you just cut. This hole is called a pinhole and is the hole through which light will enter your camera. In English pinhole cameras are called pinhole through this hole made with a pin.
The smaller the hole the sharper the image will be, but don't make it too small, as it could cause the opposite effect.
4. When you have your piece of metal with the created pin, stick it to the box with black duct tape. Use a piece of black tape to cover the pinhole, so that no light enters while you don't want the image to be captured.
5. Finally, place the photo paper inside the box. Remember to do this last step in a dark room, since otherwise, the light would damage the paper and would not serve to take pictures.
False they all use what works best for them
Both artists use abstract, use light and dark color values to help better show an object's form, and lastly, both are examples of Mordernism and close-ups.
Hope this helps!
Answer:
Joseph, Louis, Eadweard, Thomas
Explanation:
daguerreotype invented in 1839, Sallie Gardner at a Gallop filmed in 1878, first photograph taken in 1826, kinetograph invented in 1891
