Answer:
route add 170.122.0.0 netmask 255.255.0.0 reject.
Explanation:
An IP address is an acronym for internet protocol address and it can be defined as a unique number assigned to a computer or other network devices, so as to differentiate each device from one another in an active network system. Thus, an IP address is typically used to uniquely identify each computer or network devices connected to the internet or network.
In order for packets to be sent to a remote destination, these three parameters must be configured on a host.
- Default gateway
- IP address
- Subnet mask
After a router successfully determines the destination network, the router checks the routing table for the resulting destination network number. If a match is found, the interface associated with the network number receives the packets. Else, the packets is dropped because it has been blocked on the routing table.
As a system administrator, if you want to block (reject) any packets from 170.122.0.0, 255.255.0.0. The command that should be used to block those packets is to use; route add 170.122.0.0 netmask 255.255.0.0 reject.
Right click on the line separating the two columns, and you should be able to select "add column"
Answer:
The cells inside our bodies are “specialized.” This means that each type of cell performs a unique and special function. For this reason, each of the 200 different types of cells in the body has a different structure, size, shape, and function, and contains different organelles.
Explanation:
I hope this helps Ik its not fully answered Im srry:(
Answer:
Explanation:
Use composition when you can, private inheritance when you have to. Normally you don't want to have access to the internals of too many other classes, and private inheritance gives you some of this extra power
deleting files can free up space and prevent hackers from accessing your sensitive files