Answer:
992
Step-by-step explanation:
You must convert the meter the kilometer by miltiplying by 1000
and when you do it you must multiply 0.992 by 1000 since it is a fraction .
or you can work it this way :
- 0.992⇒1m
- x(the new rate) ⇒1000m
- x= 0.992*1000= 992
Answer:
2/12
Step-by-step explanation:
7/12 -5/12 = 2/12
the number 2 can go into 2 once and 12 six times so you should get 1/6 as your answer
Answer:
Austin will have to buy 180 squares of carpeting.
Step-by-step explanation:
First find the dimension of the room. We do that by multiplying the width times the length and then subtracting the cut out region in the top right. And, in order to know how big that region we cut out is, we have to do a little subtraction.
We know the room is 18' long on the left side and 12' long on the right side. We subtract 12 from 18 to get 6, and we know that the cut out region is 6' long. We do the same thing with the width, 25' wide at the bottom minus 10' wide at the top and we see that the cut out is 15' wide.
18 x 25 = 450
6 x 15 = 90
450 - 90 = 360. The area of the room is 360 
Each piece of carpet is 2' by 1'. So for every 2' long, the piece of carpet is 1' wide. Each carpet piece will cover 2 . Divide 360 by 2 and you get 180.
Answer:
D) 96%
Step-by-step explanation:
If you take 96% of 28.6 you get 27.6 so it fits
95% of red lights last between 2.5 and 3.5 minutes.
<u>Step-by-step explanation:</u>
In this case,
- The mean M is 3 and
- The standard deviation SD is given as 0.25
Assume the bell shaped graph of normal distribution,
The center of the graph is mean which is 3 minutes.
We move one space to the right side of mean ⇒ M + SD
⇒ 3+0.25 = 3.25 minutes.
Again we move one more space to the right of mean ⇒ M + 2SD
⇒ 3 + (0.25×2) = 3.5 minutes.
Similarly,
Move one space to the left side of mean ⇒ M - SD
⇒ 3-0.25 = 2.75 minutes.
Again we move one more space to the left of mean ⇒ M - 2SD
⇒ 3 - (0.25×2) =2.5 minutes.
The questions asks to approximately what percent of red lights last between 2.5 and 3.5 minutes.
Notice 2.5 and 3.5 fall within 2 standard deviations, and that 95% of the data is within 2 standard deviations. (Refer to bell-shaped graph)
Therefore, the percent of red lights that last between 2.5 and 3.5 minutes is 95%
