It all depends back on who youre present it t
younger ages (Primary-Middle),
Its Ok to use plenty of special effects, but dont ovedue your DTP with effects, so that they still can get the point.
Older ages (High & above)
Older people usually more serious than older ages to pursue their careers, so less effect, more points
Answer:
To be inspected line by line.
Explanation:
<span>There are 4 computer language generations. First is the first generation language or 1GL, second is the second-generation languages or the 2GL, next is the third-generation languages or the 3GL, and the last is fourth-generation languages or the 4GL.</span>
Answer:
Explanation:
mostTickets=0;
for (k=0; k< ndays; k++){
if (parkingTickets[k]>mostTickets) mostTickets=parkingTickets[k];
}
Answer:
Modern (i.e 386 and beyond) x86 processors have eight 32-bit general purpose registers, as depicted in Figure 1. The register names are mostly historical. For example, EAX used to be called the accumulator since it was used by a number of arithmetic operations, and ECX was known as the counter since it was used to hold a loop index. Whereas most of the registers have lost their special purposes in the modern instruction set, by convention, two are reserved for special purposes — the stack pointer (ESP) and the base pointer (EBP).
For the EAX, EBX, ECX, and EDX registers, subsections may be used. For example, the least significant 2 bytes of EAX can be treated as a 16-bit register called AX. The least significant byte of AX can be used as a single 8-bit register called AL, while the most significant byte of AX can be used as a single 8-bit register called AH. These names refer to the same physical register. When a two-byte quantity is placed into DX, the update affects the value of DH, DL, and EDX. These sub-registers are mainly hold-overs from older, 16-bit versions of the instruction set. However, they are sometimes convenient when dealing with data that are smaller than 32-bits (e.g. 1-byte ASCII characters).
When referring to registers in assembly language, the names are not case-sensitive. For example, the names EAX and eax refer to the same register.
Explanation:
