D
Giddy UP!!!!!!!!!!!!!!!!!!!!!
There are several different types of spectrums that you could expect to find from
the gas cloud, but the best option from the list would be "<span>high-frequency spectrum".</span>
Answer:
The potential difference across the plates is 226 V.
Explanation:
Given;
area of the capacitor plate, A = 0.2 m²
separation, d = 0.1 mm = 0.1 x 10⁻³ m
charge on each plate, Q = 4 x 10⁻⁶ C
Charge on the capacitor is given by;
Q = CV
Where;
C is the capacitance of the capacitor, given as;
C = ε₀A / d
Then, the potential difference across the plates is given by;
Therefore, the potential difference across the plates is 226 V.
Answer:
1.24 C
Explanation:
We know that the magnitude of the induced emf, ε = -ΔΦ/Δt where Φ = magnetic flux and t = time. Now ΔΦ = Δ(AB) = AΔB where A = area of coil and change in magnetic flux = Now ΔB = 0 - 0.750 T = -0.750 T, since the magnetic field changes from 0.750 T to 0 T.
The are , A of the circular loop is πD²/4 where D = diameter of circular loop = 16.7 cm = 16.7 × 10⁻²m
So, ε = -ΔΦ/Δt = -AΔB/Δt= -πD²/4 × -0.750 T/Δt = 0.750πD²/4Δt.
Also, the induced emf ε = iR where i = current in the coil and R = resistance of wire = ρl/A where ρ = resistivity of copper wire =1.68 × 10⁻⁸ Ωm, l = length of wire = πD and A = cross-sectional area of wire = πd²/4 where d = diameter of wire = 2.25 mm = 2.25 × 10⁻³ m.
So, ε = iR = iρl/A = iρπD/πd²/4 = 4iρD/d²
So, 4iρD/d² = 0.750πD²/4Δt.
iΔt = 0.750πD²/4 ÷ 4iρD/d²
iΔt = 0.750πD²d²/16ρ.
So the charge Q = iΔt
= 0.750π(Dd)²/16ρ
= 0.750π(16.7 × 10⁻²m 2.25 × 10⁻³ m)²/16(1.68 × 10⁻⁸ Ωm)
= 123.76 × 10⁻² C
= 1.2376 C
≅ 1.24 C
