Answer:
One Way: 79 + 62H + 15H = X
Second Way: 79 + ((62 + 15) x H) = X
Step-by-step explanation:
Given that a plumber charges a customer a one-time service fee of $ 79, $ 62 per hour for labor, and a surcharge of $ 15 per hour due to the call being an emergency, to write an expression to represent the total charges for the plumber in two different ways, with H representing the number of hours the job takes, the following equations should be formulated:
79 + 62H + 15H = X
So, for example, if the job had lasted 2 hours, the equation would apply as follows:
79 + 62x2 + 15x2 = X
79 + 124 + 30 = X
233 = X
79 + ((62 + 15) x H) = X
In the case, if the work had lasted 1 hour, the equation would apply as follows:
79 + (62 + 15) x 1) = X
79 + 77 x 1 = X
79 + 77 = X
156 = X
Answer:
628 inches²
Step-by-step explanation:
the equation for surface area is SA=2(lw+lh+hw) so..
1. 2×(16×14 + 16×3 + 3×14)
2. 2×(224+48+42)
3. 2×314
4. 628
Hope this helps! :)
The first part cannot be answered here without the diagram. However, I can tell you that the model he's building is 1/10 the size of the actual car. That means every measurement on the car is divided by 10 to get the model measurement.
The radius of the car wheel is 27 inches, so the diameter is 54 inches. Using what we know about the model, the correct proportions for the model wheel diameters would be 54 / 10, or 5.4, inches. Therefore, wheels with a diameter of 6 inches would not be in proportion with the model.