Answer:
yes it can communicate with all interfaces on the router.
Explanation:
PC1 has the right default gateway and is using the link-local address on R1. All connected networks are on the routing table.
Netsh may be a Windows command wont to display and modify the network configuration of a currently running local or remote computer. These activities will tell you in how manny ways we can use the netsh command to configure IPv6 settings.
To use this command :
1. Open prompt .
2. Use ipconfig to display IP address information. Observe the output whether IPv6 is enabled, you ought to see one or more IPv6 addresses. A typical Windows 7 computer features a Link-local IPv6 Address, an ISATAP tunnel adapter with media disconnected, and a Teredo tunnel adapter. Link-local addresses begin with fe80::/10. ISATAP addresses are specific link-local addresses.
3. Type netsh interface ipv6 show interfaces and press Enter. note the output listing the interfaces on which IPv6 is enabled. Note that each one netsh parameters could also be abbreviated, as long because the abbreviation may be a unique parameter. netsh interface ipv6 show interfaces could also be entered as netsh ipv6 sh i.
4. Type netsh interface ipv6 show addresses Observe the results of the interface IPv6 addresses.
5. Type netsh interface ipv6 show destinationcache and press Enter. Observe the output of recent IPv6 destinations.
6. Type netsh interface ipv6 show dnsservers and press Enter. Observe the results listing IPv6 DNS server settings.
7. Type netsh interface ipv6 show neighbors and press Enter. Observe the results listing IPv6 neighbors. this is often almost like the IPv4 ARP cache.
8. Type netsh interface ipv6 show route and press Enter. Observe the results listing IPv6 route information.
so a description of a mask tool that is used like painters tape to section off a spot so you do not chage that area
hope this helps
-scav
Explanation:
If a device is putting data into the computer in the form of text, sound, images, button presses etc. then it is an input device, if the device is outputting things from the computer such as sound, movement, printing, images etc., then it is an output device. ... Therefore it is an input device.
Answer:
The answer is "Option a".
Explanation:
A score can be detrimental. When an element has a score below zero, it means, that the sequences up to this point have no correlations, that are set to zero and its effects the previous alignment is excluded. Thus, alignment can be further found in every position later in the calculation. and other options are incorrect that can be described as follows:
- In option b, In this option the score can be negative, that's why we can't set its value.
- In option c, The first row and column must contain some value it can't be 0, that's why it is not correct.
- In option d, It will start with a lower score and ends with a higher score, that's why it is not correct.
Answer: D.) all of the above
Explanation: By doing all three of these it makes almost everyone in the community is happier and more positive which is better than the bully's & people who don't speak up feel less entitled, it achieves the goal.
