Answer:
The answer is below
Step-by-step explanation:
The model is a tile with length 1/4 in. and width 1/6 in while the actual tile has length 1/6 ft. and width 1/9 ft.
Firstly we have to convert the model length and width from inches to feet.
1 feet = 12 inches
model length = 1/4 in. = 1/4 in * (1/12) ft./in = 1/48 ft.
model width = 1/6 in. = 1/6 in * (1/12) ft./in = 1/72 ft.
Therefore:
Ratio of model length to actual length of tile = (1/48 ft.) / (1/6 ft.) = 1 / 8
Ratio of model length to actual length of tile = (1/72 ft.) / (1/9 ft.) = 1 / 8
Area of model tile = length * width = 1/48 ft. * 1/72 ft. = 1/3456 ft²
Area of actual tile = length * width = 1/6 ft. * 1/9 ft. = 1/54 ft²
Ratio of model area to actual area of tile = (1/3456 ft²) / (1/54 ft²) = 1 / 64
FE=14.42
ED=9.01
angle D=58
hope this helps
Answer:
60 ft is 720 in. I did 720/15...that equals 48. At this point i think each in in the drawing is a foot, so every one in is 48 ft.
(x+48)
there is no y because they only give information about one side. hope this helps. :)
Step-by-step explanation:
1.44 per kg
take 1.3 x 2, then subtract 12.7, finally divide that by 7
