Answer:
The total const is 13025 KWh
Explanation:
These are the steps to solve this problem:
- Convert all the powers from W to KW dividing by 1000.
- Convert all the times on minutes to hours dividing by 60.
- Then you can apply energy consumption formula
for any of the appliances. the results will be at KWh. - Sum all the consumtions and you will have the total cost.
Attached you will have a spreadsheet as a guidance. Any questions, just let me know.
Answer:
a) the average CPI for machine M1 = 1.6
the average CPI for machine M2 = 2.5
b) M1 implementation is faster.
c) the clock cycles required for both processors.52.6*10^6.
Explanation:
(a)
The average CPI for M1 = 0.6 x 1 + 0.3 x 2 + 0.1 x 4
= 1.6
The average CPI for M2 = 0.6 x 2 + 0.3 x 3 + 0.1 x 4
= 2.5
(b)
The average MIPS rate is calculated as: Clock Rate/ averageCPI x 10^6
Given 80MHz = 80 * 10^6
The average MIPS ratings for M1 = 80 x 10^6 / 1.6 x 10^6
= 50
Given 100MHz = 100 * 10^6
The average MIPS ratings for M2 = 100 x 10^6 / 2.5 x 10^6
= 40
c)
Machine M2 has a smaller MIPS rating
Changing instruction set A from 2 to 1
The CPI will be increased to 1.9 (1*.6+3*.3+4*.1)
and hence MIPS Rating will now be (100/1.9)*10^6 = 52.6*10^6.
Answer:
RJ-11 connector.
Explanation:
RJ-11 (Registered Jack-11) also known as the phone line or modem port is a network cable having twisted wire pairs and a modular jack with two, four or six contacts. It is generally used with telephones and modem.
Hence, the other connector type that can be used with CAT 3 installations is the RJ-11 connector.
