Answer:
C. 66 square units
Step-by-step explanation:
The area of the middle rectangle would by base × height, or y × h, or 6 × 6.
The area is 36.
The area for one triangle would 1/2 × base × height.
(But since there are two triangles to solve for, the 1/2 is not necessary, and we can just do base × height again.)
So, it would be x × h, or 5 × 6.
The area is 30.
Combine both areas to get the whole area of 66 units²
0.84(20)=$16.80
700/100=7
7(1.02)=$7.14
$7.14+16.80=$23.94 in total
Step-by-step explanation:
The answer is mentioned above.
Answer:
9.233 ft, 23.233 ft
Step-by-step explanation:
If the shorter leg is x, then the longer leg is x+14 and the Pythagorean theorem tells you ...
x^2 + (x +14)^2 = 25^2
2x^2 +28x +196 = 625
x^2 +14x = 214.5
x^2 +14x +49 = 263.5
(x +7)^2 = 263.5
x = -7 +√263.5 ≈ 9.23268
The two leg lengths are √263.5 ± 7 feet, {9.23 ft, 23.23 ft}.
Step-by-step explanation:
b is per the identity of angles on parallel lines when intersected by one inclined line the same as the 40° angle.
so,
b = 40°
due to the parallel nature of the 2 lines there is a symmetry effect for such shapes inscribed a circle. the upper and the lower triangle must be similar. and when applying a vertical line through the central crossing point, everything to the left is mirrored by everything on the right.
so, angle c must be equal to angle b.
c = 40°
and as the sum of all angles in a triangle is always 180°, d is then
d = 180 - 40 - 40 = 100°
the interior angle of the arc angle a is the supplementary angle of d (together they are 180°), because together with d they cover the full down side of the top-left to bottom-right line.
interior angle to a = 180 - 100 = 80°
due to the symmetry again, the arc angle opposite to a is the same as a.
as we know, the interior angle to a pair of opposing arc angles is the mean value of the 2 angles.
so, we have
(a + a)/2 = 80
2a/2 = 80
a = 80°
there might (and actually should) be some more direct approaches for "a" out of the other pieces of information, but that was the most straight one right out of my mind, and I don't spend time on finding additional shortcuts, when I have already a working approach.
