<u>A potentiometer a three wire variable resistor is used in </u><u>Throttle position (TPS) Sensor.</u>
<u />
Explanation:
A <u>potentiomete</u>r is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider. In case only two terminals are used, one end and the wiper, it acts as a variable resistor or rheostat.
A<u> throttle position sensor (TPS) </u>is a sensor which is used to monitor the air intake by an engine. This sensor is usually located on the shaft or the butterfly spindle because it can be directly be used to use the position of the <u>THROTTLE</u>
The T<u>hrottle Position Sensor (TPS) is a part of Fuel Management system of a vechile.The proper function of Throttle Position Sensor (TPS) ensures that the right amount of fuel and air is delivered to the vechile engine.</u>
Answer:
The Special Function Register (SFR) is the upper area of addressable memory, from address 0x80 to 0xFF.
Explanation:
The Special Function Register (SFR) is the upper area of addressable memory, from address 0x80 to 0xFF.
Reason -
A Special Function Register (or Special Purpose Register, or simply Special Register) is a register within a microprocessor, which controls or monitors various aspects of the microprocessor's function.
Answer:True
Explanation: Both double and float have the ability to provide the values in the decimal.The wideness for the float is 4 bytes and 8 bytes wideness is present for the double, which indicates that the double is more detailed than the float. The more detailed form gives more precision.The precision in the double also reduces the chances of error as compared with float.Thus the given statement is true.
Yes, It's important to do that. The more shield you have the more you stay alive between 1v1s
Hope this helps!
Complete question is attached as snapshot.
Answer:
This will result in a compilation error.
Here's the inheritance hierarchy:
Meg -> Lois -> Brian -> Stewie
Now Meg has 2 public Fxns, a() and toString().
Lois inherits from Meg and all its public functions as well but, overrides the a() fxn of its super class.
So finally Lois has fxns a(), b() and toString().
Brian extends Lois and inherits all the above listed fxns of Lois, but overrides the b() and toString() fxns.
Stewie extends Brian and inherits all the fxns of Brian, but overrides the a() and toString() fxns.
In the Main driver fxn, we call a() and b() methods of all these classes but, the base class Meg has no b() and it is not extending any class so its not available in its scope.
This results in a compilation error.
Explanation:
