Technologies that can operate in the 125 kHz to 134 kHz range is the
B. RFID
Explanation:
- RFID is technology which works on radio frequency and it is used for the auto-identification for the different object.
- The RFID system mainly consists of two parts. In this RFID system, this RFID reader continuously sends radio waves of a particular frequency
- RFID is the use of radio waves to read and capture information stored on a tag attached to an object, providing a unique identifier for an object.
- Active RFID tags have a transmitter and their own power source. Instead, they draw power from the reader, which sends out electromagnetic waves that induce a current in the tag's antenna.
- Semi-passive tags use a battery to run the chip's circuitry, but communicate by drawing power from the reader.
- Radio frequency identification (RFID) can operate in three frequency bands: 125 kHz to 134 kHz, 13.56 MHz, or 856 MHz to 960 MHz. Bluetooth is 2.4 GHz; NFC is 13.56 MHz; and LTE is between 600 MHz and 6 GHz.
The most common operating system for personal computers is Windows.
Answer:
Se explaination
Explanation:
/Declaring variables
integer currentPrice
integer lastMonthPrice
integer changeLastMonth
float mortagage
//Reading input
currentPrice = Get next input
lastMonthPrice = Get next input
//Calculating price change
changeLastMonth = currentPrice - lastMonthPrice
//Calculating mortagage
mortagage = (currentPrice * 0.051) / 12
//Printing output
Put "This house is $" to output
Put currentPrice to output
Put "\nThe change is $" to output
Put changeLastMonth to output
Put " since last month." to output
Put "\nThe estimated monthly mortgage is $" to output
Put mortagage to output
Answer:
subnet mask
Explanation:
A subnetwork or subnet mask is a logical subdivision of an IP network.
To find out your subnet mask, the simlest way around it is to is to run a simple command line in windows.
Simply press the Windows key and “R” at the same time to open the command prompt and type “cmd” followed by “enter.” This will allow you to see your subnet mask.
In IPv4, the subnet mask 255.255. 255.0 is 32 bits and consists of four 8-bit octets. The address: 10.10. 10.0 subnet mask 255.255.255.0 this simply indicated that the subnet mask consists of a range of IP addresses from 10.10.10.0 - 10.10.10.255.
Subnet masks (IPv4) are often involved in identifying the range of IP addresses that make up a subnet, it can also be described as a group of IP addresses on the same network.
Click the insert tab, it'll show a pop up window. Go to the location of where your picture may be. Double click on the photo, and it will be inserted into the word document.
