Answer:
•Make sure doorway openings are at least 32 inches wide and doorway thresholds are no higher than 1/2 inch.
•Keep aisles wide and clear for wheelchair users.
•Make sure all levels of the lab are connected by a wheelchair-accessible route of travel.
For students with mobility impairments, make sure there are procedures in place for retrieving materials that may be inaccessible.
Make sure ramps and/or elevators are provided as an alternative to stairs. Elevators should have both auditory and visual signals for floors. Elevator buttons should be marked in large print and Braille or raised notation and easily reachable for wheelchair users.
Locate the lab near wheelchair-accessible restrooms with well-marked signs.
Service desks need to be wheelchair-accessible.
Provide ample, high-contrast, large-print directional signs throughout the lab. Mark equipment in the same fashion.
Provide study carrels, hearing protectors, or private study rooms for users who are easily distracted by noise and movement around them.
Provide at least one adjustable-height table with easily reachable controls for each type of computer.
Have wrist rests available to those who require extra wrist support while typing.
Keep document holders available to help users position documents for easy reading.
Answer:
Option B i.e., mdsswitch# show Vsan membership is the correct option.
Explanation:
The following commands is used by the engineer because it displays the membership of the VSAN( virtual storage area network).
switch# command is used to enter the configuration mode. So, the engineer using the following commands to verify that the interfaces for the research department.
Answer:
Exaggerated used of the technique can produce a comical effect, while more realistic animation must time the actions exactly to produce a convincing result. Slow in and slow out. Adds more frames near the beginning and near the end of a movement, and fewer in the middle, to make the animation appear more realistic.
Answer:
The statement is written in Java.
- System.out.printf("%.5f %.5f %.5f",a,b,c);
Explanation:
Presume that there are three variable a, b and c which have already been declared and initialized with 4.014268319, 14309, 0.00937608 respectively.
To print each of the value with 5 digits to the right of the decimal point, we can use printf() method. We create a format specifier %.5f which is a placeholder of a floating point value. The .5 will specify five digits to the right of the decimal point.
We just create three similar format specifiers ( one for variable a, b, and c, respectively) and include them into printf() method. This will print the output as follows:
4.01427 14309.00000 0.00938
Yes and No it all depends on how the author wants the poem how to be and become. Majority of the time science fiction is set for the future.
