Answer:
You might use static ip addressing when your network will be small and you don´t have plans to create a bigger network from this.
Explanation:
When you use static ip addressing you have to configure the routes between hosts manually, is easy to define this rules manually when your network is small because you know all the addresses and the routes to configure. But if your network is bigger and you didn´t know all the host addresses will take a long time to configure this manually.
Answer: The answer to the question is as follows:
Minimum BW= n*Bc + (n-1) Bg
Explanation:
FDM is a multiplexing technique that takes several baseband signals of n Khz wide (let's assume that all have the same bandwidth), and translates them in frequency so they can be transmitted together, at a higher frequency.
If we assume no guard bands between the different signals, the mimum bandwidth needed would be n times the bandwidth of a single signal.
In order to avoid crosstalk between signals, as the communication channel is not perfect, it usually leaves some room between any 2 signals, which it is called a band guard, and because there is a band guard for any 2 contiguous signals in the spectrum, the total number of bandguards (Bg) will be equal to (n-1) signals, so the total bandwidth to be used will be as follows:
BW needed: n*Bc + (n-1) Bg.
Answer:
A
Explanation:
Schools are trying to adjust to technology to help students.
Answer:
here are three basic categories for fire alarm panel signals: trouble, supervisory, and alarm. Trouble Signal. A trouble signal is typically designated by a yellow light and means that there is an operational issue. For some more advanced systems, the panel may indicate the kind of problem and where it is located.
Explanation:
