Answer:
Spyware
Spam is just unwanted soliciation, spoofing is making links appear as something else, pharming is creating a fake website for victims to use.
Answer:
c. traffic shaping
Explanation:
A traffic shaping system is one that allows to adapt the incoming data traffic that comes from some node of the network giving it a special treatment called conformation of accepted traffic and thus allowing the frames to be forwarded through the network of data under traffic rules without having gone through some traffic shaping method, this can be detected as non-conforming traffic at the edge of access to the discarded metropolitan network.
Traffic shaping is a mechanism that alters the traffic characteristics of the cell flow of a connection to achieve better network efficiency while maintaining QoS objectives or in order to ensure that the cell flow conforms to traffic parameters according to the leaky bucket algorithm configuration of the traffic contract. Traffic shaping can be used in ATM, for example, to reduce peak speed, limit the length of the burst by means of adequate spacing of cells over time. The use and location of this function is network specific.
Answer:
Explanation:
Always the getaway is the first device in a network, and for that was assigned this IP address 192.168.2.1, is the first address of the block, a network getaway gives us interoperability between networks and contains devices, and is a protocol translator, this is a piece of hardware used for telecommunication networks.
Answer:
Kindly check attached picture
Explanation:
Flowchart gives a graphical representation of a steps taken towers the execution of a program.
In the flowchart attached, A variable was initialized and set to 0 ; then a for loop was used to iterate integers 1 up to 10, for each number. It is added to the initialized variable sum until all the 10 integer numbers are added. The the average is obtained by dividing by 10.
Answer:
#include <iostream>
#include <vector>
using namespace std;
void calGPA();
vector<int> g;
vector<int> h;
int main(){
char pushMore = 'y';
int fg, fh;
for (;;){
if (pushMore == 'n'){
break;
} else{
cout<< "Enter integer for grade: ";
cin>> fg;
cout<< "Enter integer for credit hours: ";
cin>> fh;
g.push_back(fg);
h.push_back(fh);
cout<< "Do you want to add more grade and credit hours? y/n: ";
cin>> pushMore;
}
}
calGPA();
}
void calGPA(){
double total = 0, GPA;
for (int i = 0; i < g.size(); ++i) {
total += g.at(i) * h.at(i) ;
}
cout<< "The GPA is : "<< total/g.size();
}
Explanation:
The C++ source code above defines two vectors 'g' and 'h'. The latter holds the grades of a student while the former holds the credit hours for the subject taken. The void 'calGPA' function calculates and prints the student's GPA.
