Answer:
fav_number=26
guess=0
while 0==0:
try:
guess=int(input('Enter your guess: '))
except:
print ('You have entered an invalid value.')
else:
if guess == fav_number:
break
elif guess>fav_number:
print ('Try a smaller number.')
elif guess<fav_number:
print ('Try a larger number')
Explanation:
define a variable fav_number and set it to number. write an infinite while loop to read input from user. In try block get input from user, if user enters invalid input code in except block will be executed. For valid input
- check if its greater than favorite number, if yes print try smaller number.
- check if its smaller than favorite number, if yes print try larger number.
- check if its equal to favorite number, break loop and exit
Answer:
a. gpupdate /force
Explanation:
Based on the information provided within the question it can be said that if the administrator does not want to wait she can use the command gpupdate /force. This command allows the individual to update both the local Group Policy settings and Active Directory-based settings. This the force tag makes it so that the policy is immediately update.
<span> The PC-doctor software is system information tool used to diagnose and test the computer and determine its configuration.</span>
If the PC-doctor software is installed on a computer's hard drive, you should start the program in two different ways:<span>
1. Press function key during startup sequence
2. Start menu shortcut</span>
The correct answer is that WWW. is universal, meaning that any and all url addresses start and have www.
My reasoning is that if you were to look up, lets say google, do :
www.(google).com ( remove parentheses )
then
google.com
You come up with the same results THUS YOUR CORRECT ANSWER IS YES! ALL URL ADDRESS HAVE AND CONTAIN WWW.!!!
Answer:
Authorize Srv11
Explanation:
In order to fix this problem, Nadine should Authorize Srv11. The problem is most likely being caused due to failure of authorization of the server. This would prevent this server from being on the same scope as Srv1 and therefore, it is why the IPaddress being given is different. DHCP is an automatic protocol and would not be able to provide an IP address in the same scope if the server is not Authorized to do so.
