Answer and Explanation:
Omnidirectional antenna are those antennas which receives the signals from multiple directions equally.These are the antennas that cannot get the signal from a particular direction thus gives the low throughput.
To get high throughput, directional antennas should be installed because they receive the signal from a particular direction only .Thus the signal received from these antenna work for a certain area.Example-Television antenna at homes are directional antennas names as Yagi-uda antennas.
You would use the formatting section of alignment.
B) a desktop is less likely to be stolen or damaged
Explanation:
A.)
we have two machines M1 and M2
cpi stands for clocks per instruction.
to get cpi for machine 1:
= we multiply frequencies with their corresponding M1 cycles and add everything up
50/100 x 1 = 0.5
20/100 x 2 = 0.4
30/100 x 3 = 0.9
CPI for M1 = 0.5 + 0.4 + 0.9 = 1.8
We find CPI for machine 2
we use the same formula we used for 1 above
50/100 x 2 = 1
20/100 x 3 = 0.6
30/100 x 4 = 1.2
CPI for m2 = 1 + 0.6 + 1.2 = 2.8
B.)
CPU execution time for m1 and m2
this is calculated by using the formula;
I * CPI/clock cycle time
execution time for A:
= I * 1.8/60X10⁶
= I x 30 nsec
execution time b:
I x 2.8/80x10⁶
= I x 35 nsec
Answer:
D. Low-level components are combined into clusters that perform a specific software sub-function
Explanation:
Normally, regression testing are done on a manual basis by simply re-executing a subset of the entire available test cases or it can be done automatically by utilizing playback tools or automated capture. Hence, from the options, a combination of low-level components into clusters that perform a specific sub-function does not align with how regression testing are done either manually or automatically.
