Answer:
So we already knew all three sides, there are more than one way to do it, for example:
sin∠F = HG/HF = 12/13
cos∠F = GF/HF = 5/13
tan∠F = HG/GF = 12/5
ctg∠F = GF/HG = 5/12
All of them will give you the result which is approximately 67°.
It there a picture because if there is u can’t see the picture sorry
I would compute sqrt(1 + 160pi^2) first to get approximately 39.75093337
Add this to 1 and we have 40.75093337
Then divide over 2pi to get a final approximate result of 6.48571248
So x = 6.48571248 is one approximate solution
In short, I computed
only focusing on the plus for now.
----------------------
If you were to compute
you should get roughly -6.167402596 as your other solution. Each solution can then be plugged into the original equation to check if you get 0 or not. You likely won't land exactly on 0 but you'll get close enough.
Step-by-step explanation:
step 1. slope = rise/run
step 2. the rise is the height between any 2 points
step 3. the run is the distance left or right between the same 2 points
step 4. if the line goes up "left to right" the slope is positive, down it is negative
step 5. slope = + 6/2 = 3.
2 Would be the answer.
Hope that helps!!