Answer:
host-based security measures
Explanation:
Anti-virus, host-based firewall, system hardening, change control, and log management are host based.
Explanation:
Steps to clear CMOS using the battery method
Turn off all peripheral devices connected to the computer.
Disconnect the power cord from the AC power source.
Remove the computer cover.
Find the battery on the board. ...
Remove the battery: ...
Wait 1–5 minutes, then reconnect the battery.
Put the computer cover back on.
Answer:
The space available will vary between 800 GB (100%) and 400 GB (50%) of the total disks, depending on the RAID level.
The OS will handle the RAID as a single disk.
Explanation:
Each RAID level implements parity and redundancy in a different way, so the amount of disks used for this extra information will reduce the space available for actual storage.
Usual RAID levels are:
<u>RAID 0:</u> does not implement any redundancy or parity, so you will have available 100% of the total storage: 8 x 100 GB = 800 GB
<u>RAID 1:</u> Duplicates all the information in one disk to a second disk. Space is reduced in half: 400 GB
<u>RAID 5:</u> Uses the equivalent of 1 disk of parity data distributed evenly on each disk, meaning the space available is
of the total disks:
of 800 GB = 700 GB
Writting and reading the information on a RAID storage is handled by a raid controller, either implemented in hardware or software. The OS will "see" a single disk and will read or write information as usual.