Answer:
% here x and y is given which we can take as
x = 2:2:10;
y = 2:2:10;
% creating a matrix of the points
point_matrix = [x;y];
% center point of rotation which is 2,2 here
x_center_pt = x(2);
y_center_pt = y(2);
% creating a matrix of the center point
center_matrix = repmat([x_center_pt; y_center_pt], 1, length(x));
% rotation matrix with rotation degree which is 45 degree
rot_degree = pi/4;
Rotate_matrix = [cos(rot_degree) -sin(rot_degree); sin(rot_degree) cos(rot_degree)];
% shifting points for the center of rotation to be at the origin
new_matrix = point_matrix - center_matrix;
% appling rotation
new_matrix1 = Rotate_matrix*new_matrix;
Explanation:
We start the program by taking vector of the point given to us and create a matrix by adding a scaler to each units with repmat at te center point which is (2,2). Then we find the rotation matrix by taking the roatational degree which is 45 given to us. After that we shift the points to the origin and then apply rotation ans store it in a new matrix called new_matrix1.
Answer: killall[process_name] or kill[PID]
Explanation:
Killall is a tool for disabling running processes on the system. It will disable all programs that matches the name mentioned.
kill disables processes based on process id numbers. it does not disable the process directly. The process recieves a signal where the process will follow instructions which it has to follow if it receives the signal.
You have a raspberry pi connected to all the sensors and a code running to trigger if the sensors are triggered. Each sensor and keypad would run to a different input on the pi. They should al be able to be powered with a single cell lipo. Is that what you are asking?
Answer: This Project will involve Hero Revamps, Hero Adjustments, Hero Remodels, and much more. Project NEXT is divided into 2 phases: the first phase was released on September 22, 2020, the second phase was released on June 15, 2021 and the third phase is to be released on "September 2021".
Answer:
A and C
Explanation:
From the above scenario, the Ethernet standards that meet the above guidelines are:
A. 1000BaseSX; and
C. 10GBaseSR.
Cheers
