There are two common command lines used in creating design assembly. The 'push' and 'pull' command. Both allows you to get parts from the original predelivered content's source desgian and recreate the design faster and with less memory.
Answer:
The correct answers are: (A) +/- 5V and (B) +/- 12V
Explanation:
First at all, the purpose of the power supply is transforming from AC (Alternating Current) to DC (Direct Current) for use this energy in chips and electronics devices that consume this type of power. Usually the most common DC voltage for electronics is 5V but in your CPU you also have other devices that might going to need more voltage like fan or hard drives thats ´s why 12V is an also an option. Now some other devices are going to need negative sources such -5V or -12V as well.
Answer:
The decimal value of 101₂² base 2 = 25 base 10
Explanation:
The number 101₂² in decimal value is found as follows;
101₂ × 101₂ = 101₂ + 0₂ + 10100₂
We note that in 101 + 10100 the resultant 2 in the hundred position will have to be converted to a zero while carrying over 1 to the thousand position to give;
101₂ + 0₂ + 10100₂ = 11001₂
Therefore;
101₂² = 11001₂
We now convert the result of the square of the base 2 number, 101², which is 11001₂ to base 10 as follows;
Therefore converting 11001₂ to base 10 gives;
11001₂= 1 × 2⁴ + 1 × 2³ + 0 × 2² + 0 × 2 ¹ + 1 × 2⁰
Which gives;
16 + 8 + 0 + 0 + 1 = 25₁₀.
Answer:
14.0
Explanation:
The loop converts each answer to a float. The accumulator variable adds the values entered.
2.0 + 5.0 + 1.0 + 6.0 = 14.0
Answer: I didn’t have a “date”, I went with friends.
