From the explanation below,
a= -10 and b= -4
All you have to do is just bring the numbers that are not zero from each digit.
so in this process, the answer you would get is 724,562.
I hope this helped
Answer:
A company produces electric insulators. The strength of the insulators is important since a broken insulator may cause a short circuit. Unfortunately, the strength varies significantly due to the material. Because of the expense, only a limited number of insulators could be tested. The engineers sampled 25 insulators (From a production run of 200), and conducted a destructive test to determine the force that was required to break the insulators. The mean value of this force was 1723 lbf with a sample standard deviation of 90 lbf. You may approximate the population standard deviation with the sample standard deviation for the following questions. a. Determine if the population is large enough or if a finite population correction (FPC) factor is needed. If so, what is the FPC factor? b. For 95% confidence, determine the margin of error (+ lbf) c. For these conditions, estimate the range of the probable population mean. Provide lower and upper values. For 95% confidence, determine the margin of error ( Assume the same mean and sample standard deviation. What is one advantage and one disadvantage of using 50 insulators instead of 25 insulators? d. lbf) if 50 insulators were tested.
Step-by-step explanation:
3e-1.5f-.375 is the answer.
Answer:
7 inches
Step-by-step explanation:
First, you make an imbalanced equation: 22.75/x=13/4. Then you cross multiply: 22.75 * 4= 91. Then divide 91/13 = 7.