Answer:
Reseat the new stick of RAM
Explanation:
Joe needs to reseat the new stick of the RAM. For that, he should gently release the clips which hold RAM in the correct posture, and one on each side. Joe is required to do this for each of the available memory modules. And then he will have the cautiously replace all the memory modules( 2 in number) through to DIMM slots which are on the motherboard. Make sure that you have noted down the locations of each notches on the RAM as well as the DIMM slots.
Answer:
chain also why would some knock on their own dang door lol
Explanation:
it's easy indeed
total = 0
i = 0
while i < 10:
temp = float(input("Enter Temperature: "))
total += temp
i += 1
print("Sum = "+str(total))
I hope this helps!
OSHA standards appear in the <span>Code of Federal Regulations (CFR) and are then broken down into Parts</span>
Answer:
Following are the steps with actions that are involved in required to perform a packet transfer.
Explanation:
- Step 1: The host sends a connection request to server which is at IP address 209.165.200.254
- Step 2: R1 check the configuration of NAT to inquire weather the packet should be translated or not.
- Step 3: If there is no entry found for translation of given IP address, It is assumed that the IP address 192.168.10.10 will be translated already.
- Step 4: R1 selects a global address from the dynamic address pool that is available to it.
- Step 5: R1 replaces the given IP address 192.168.10.10 with the translated inside global address.
i hope it will help you!
