Answer / Explanation:
195.200.0.0/16
Note: Class C address can not be assigned a subnet mask of /16 because class c address has 24 bits assigned for network part.
2ⁿ = number of subnets
where n is additional bits borrowed from the host portion.
2ˣ - 2 = number of hosts
where x represent bits for the host portion.
Assuming we have 195.200.0.0/25
In the last octet, we have one bit for the network
number of subnets = 2¹ =2 network addresses
number of host = 2⁷ - 2= 126 network addresses per subnets
You could install it from a flash drive a disk.
Answer:
the answer to your question is obviously "rational"
Answer:
su ,sg and sudo command.
Explanation:
Whenever the user needs to enable workgroup mates should use fdisk including just that disk on both the /dev / sda disk, using the following command to update and configure the following packages. Thus he uses the command su, sg, and sudo.
So, the following commands are required according to the following statement.
Answer:
1)PERFORMANCE
2)RANGE
Explanation:
A mesh network can be regarded as local network topology whereby infrastructure nodes connect dynamically and directly, with other different nodes ,cooperate with one another so that data can be efficiently route from/to clients. It could be a Wireless mesh network or wired one.
Wireless mesh network, utilize
only one node which is physically wired to a network connection such as DSL internet modem. Then the one wired node will now be responsible for sharing of its internet connection in wireless firm with all other nodes arround the vicinity. Then the nodes will now share the connection in wireless firm to nodes which are closest to them, and with this wireless connection wide range of area can be convered which is one advantage of wireless mesh network, other one is performance, wireless has greater performance than wired one.
Some of the benefits derived from configuring a wireless mesh network is
1)PERFORMANCE
2)RANGE