Answer:
Offset bits: 3-bits
Set number of cache: 12-bits
Tag bits: 7-bits
22-bit physical address
Explanation:
Since the system is 32K so,
=2⁵.2¹⁰
=2¹⁵
As we know that it is 8-way set associative so,
=2¹⁵/2³
=2¹⁵⁻³
=2¹²
2¹² are cache blocks
22-bit physical address
Off-set bits are 3 as they are calulated from 8-way set associative information.
Set number of cache : 12-bits
For tag-bits:
Add off-set bits and cache bits and subtract from the total bits of physical address.
=22 - (12+3)
=22 - 15
=7
Answer:b)via radio signals
Explanation: Machine-to-machine technology is the technology that helps in sharing of the real time information of the device that have embedded sensor.They can work without the help of the manual factors.
The data is shared through the help of the radio signals in the devices like turbines vending machines etc for the tracking purpose and managing.
Thus the other options are incorrect because short distance is a disttance, cloud services are for the collection of services and databases contains the data. So, the correct option is option (b).
Answer:
Could you seperate them if they are different answers? I'm lost, sorry!
Explanation:
Full question attached
Answer and Explanation:
1. There’s need to ask for help and advice from people who have the
knowledge and skills in making a simple electrical gadget.
2. Adapter is used to plug appliances that are far from the main power source.
3. Do not touch the metal pipes while you are doing electrical repairs.
4. Shut off the power at the main switch or circuit breaker and unplug the equipment when working on electricity.
5. Pliers are tools used to grip, pull or cut electric wires.
From the above, we have corrected some of the errors that could be made in everyday home appliances or home electricity. In number 4, it is also worthy of note that shutting off power at the main switch will only require emergency situations otherwise we need only shut off the one for the problem circuit and leave the rest.
Answer
To find mean of data add all the numbers in the set of data and divide the sum by the number of addends.
To find range, identify the difference between the highest value and lowest value in the set of data.
Explanation
Mean, mode, median and range are the primary measurements used to get the measures of central tendencies. To get the mean and range; first arrange the data in an ascending order, then identify the highest value and the lowest value in the set. The difference between these two data values gives the range of the set of values. For the mean, add all the set of values and then divide their sum with the number of values in the set of data.
