Answer:
Computer storage and memory is often measured in megabytes (MB) and gigabytes (GB). A medium-sized novel contains about 1 MB of information. 1 MB is 1,024 kilobytes, or 1,048,576 (1024x1024) bytes, not one million byte
Answer:
enable the used ports in the router with their respective IP address and only the connected ports in the switch. Allow configure the STP on the switch
Explanation:
Network switches are used to connect a group of computer devices in a network LAN. It is automatically enabled when a port is connected and creates a MAC address table of the computers connected to it. STP or spanning-tree protocol is a protocol used to prevent looping in a switch. Unused ports can be disabled for security reasons.
A router is a network device that is used to forward packets between networks. All used ports in a router must be enabled and configured with an IP address and subnet mask.
Most computer devices are connected to the computer through port
Keyboard through usb port
Printer through usb port
Hand point device through usb port
Also computer equipped with LPT port for printers and COM port for additional devices like external modems e.t.c
Answer: If two different station are addressed with the same hardware address then there are chances of occurrence of the failure in the network at irregular intervals.The failure or error will occur because of the both the devices are seen as one by the network due to same address.
An intelligent network system id used ,it can identify the error can help in the prevention of the failure.Other option for configuring the situation is assigning the MAC(media access control)address to devices which are unique in nature thus, no device can have same address.
The second factor as it did not make travel easy at all
